Mosquito Netting & Curtain for 3m x 3.6m Yardtopia Aspendale Gazebo
Mosquito Netting and Curtain for 3m x 3.6m Yardtopia Aspendale Metal Gazebo
Yardtopia
Mosquito Netting and Curtain for 3m x 3.6m Yardtopia Aspendale Metal Gazebo
In stockSKU:YTGZ-ASP36-CUR
$399.00
Description
The Mosquito Netting & Curtain set for the Aspendale Gazebo lets you enjoy the outdoors while being protected. The mosquito netting keeps away unwanted insects, while the curtain provides extra protection from the elements.
Delivery
Calculate your delivery options
Your Delivery Location is Broadmeadows, VIC 3023. Change.
Double roof design for excellent wind rating, stability and ventilation
30-gauge galvanised steel roof to reduce heat transfer
Reinforced steel brackets for added security
Easy assembly - Pre-cut, pre-stained and pre-drilled for added convenience
Mosquito netting included - Polyester material
Zip up to close net
Dimensions and Weight
Product Dimensions
361cm x 309cm x 289cm (L x W x H)
Product Weight
178.3kg
Product Dimensions (Netting)
322cm x 270cm x 214cm (L x W x H)
Product Dimensions (Curtain)
326cm x 274cm x 208cm (L x W x H)
Folded Dimensions
42cm X 37.5cm X 16cm (L x W x H)
Carton Size
Box 1
217cm x 30cm x 18cm
Box 2
193cm x 31cm x 16.5cm
Box 3
143cm x 63.5cm x 5cm
Installation Precautions
1. If you notice misalignment between the beam and the post holes during installation,
possible causes include: installing on an uneven surface or fully tightening all screws too early. The
solution is to assemble the structure on a level, flat surface, initially installing screws without
fully tightening them, and only securing all fasteners uniformly after the entire assembly is in place.
2. Slight wobbling after extended use may be caused by screw loosening due to thermal
expansion/contraction or wind-induced vibration. We recommend inspecting all fasteners once a year.
3. Please wear protective gloves during installation—especially when handling roof tiles—to
avoid cuts or injuries.
Safety Precautions
Permanent Structures may require a building permit - advised to consult with your council
Ensure at least 2m clearance for overhead electrical wires
Requires two or more people for safe assembly
Ample structural support under this product must be ensured
This structure requires anchoring to the ground (e.g. concrete footings), concrete anchoring
screws and plates are provided
For installation on a timber deck, you must ensure there is ample structural support under the
deck. Screws are not provided to attach to deck
Outdoor domestic use only
Certifications
This pergola has been independently certified to be compliant with Australia's
National Construction Code and all applicable Australian Standards.
NCC - BCA Vol. 2: PART H1
AS/NZS 1170.0:2002, AS/NZS 1170.1:2002, AS/NZS 1170.2:2021, AS/NZS 1664.1:1997, AS 3600:2018, AS 4100:2020
Wind Rating of N2, up to 145kph (AS4055)
Regulation 126: Certificate of Compliance (NCC)
Safety Precautions (Netting and Curtain)
It is recommended to dismantle the structure during strong winds. Additionally, the curtain is a
consumable/replaceable part; this should be noted during sale, and it is recommended to remove and store it during
the off-season.
Warranty
This product is covered by the following warranty:
• 3 Year replacement warranty on all parts for manufacturer's defect
*Please read our Warranty Terms & Conditions by clicking
here
Assembly Required
This product comes flat packed in multiple cartons with assembly instructions included
